ABB IRB 6600 - 225/2.55 type B, Руководство по эксплуатации продукта

Страница: 216 / 533

3 Maintenance
3.7.1. Using the SIS system
3HAC023082-001 Revision: E 214
©
Co
py
rig
h
t 200
4-
200
8 ABB. All righ
ts reser
v
ed.
3.7 Service Information System, M2000
3.7.1. Using the SIS system
General
This is a brief description of how to use the Service Information System, SIS for M2000 robot
systems. Details may be found in:
• Service Information System, SIS
•
Defining the SIS input parameters
• Setting the SIS parameters
•
Importing/exporting SIS data
• Reading the SIS output logs
The section is only valid for M2000 systems. For information regarding M2004 robot
systems, see additional documentation, Operating manual - Service Information System :
Art. no. is specified in section References on page 10 .
Basic procedure
Action Reference
1. Determine which of the system functions you
require.
These are described in Description of
Service Information System (SIS) on
page 215
.
2. Define what values are adequate and
suitable for your application in your
production environment.
Recommendations on how to define
these are given in
SIS system parameters
on page 217 .
Maintenance intervals recommended by
ABB are specified in section
Maintenance
schedule on page 131 .
3. Enter these parameters in the system. How to do this is detailed in Setting the
SIS parameters on page 219 .
4. Run the robot in normal operation.
5. Reset the counter if a repair is made, or if a
counter for any other reason is restarted.
The TPU displays for resetting any SIS
value are shown in
Description of Service
Information System (SIS) on page 215 .
6. When a time limit, set in the parameters, is
exceeded, a message may be read on the
Tech Pendant Unit (TPU).
How to access this is detailed in Reading
the SIS output logs on page 221 .
7. If the log containing the message is to be
available from an external PC, or if the SIS
parameters are to be entered from an
external PC, a set of software tools are
available to build such an application.
These are described in Exporting the SIS
data on page 222 .