ABB i-bus SA/S 2.6.2.1, Руководство по эксплуатации продукта

Страница: 47 / 171

ABB i-bus

KNX
Commissioning
50 2CDC 505 056 D0208 | SA/S
3.1 Overview
The following table provides an overview of the functions of the Switch Actuators and their application
programs:
SA/S 4.6.1.1
SA/S 8.6.1.1
SA/S 12.6.1.1 SA/S 2.6.2.1
SA/S 4.6.2.1
SA/S 8.6.2.1
SA/S 12.6.2.1 SA/S 2.10.2.1
SA/S 4.10.2.1
SA/S 8.10.2.1
SA/S 12.10.2.1 SA/S 2.16.2.1
SA/S 4.16.2.1
SA/S 8.16.2.1
SA/S 12.16.2.1 SA/S 2.16.5.1
SA/S 4.16.5.1
SA/S 8.16.5.1
SA/S 12.16.5.1 SA/S 2.16.6.1
SA/S 4.16.6.1
SA/S 8.16.6.1
SA/S 12.16.6.1
Type of installation MDRC MDRC MDRC MDRC MDRC MDRC
Number of outputs 4/8/12 2/4/8/12 2/4/8/12 2/4/8/12 2/4/8/12 2/4/8/12
Module width (units) 4/6/8 2/4/8/12 2/4/8/12 2/4/8/12 2/4/8/12 2/4/8/12
Manual operation –
■ ■ ■ ■ ■
Contact position indicator –
■ ■ ■ ■ ■
I
n
rated current (A)
6 A 6 AX 10 AX 16 A 16/20 A 16/20 A
Current detection – – – – –
■
Switch function
– ON/OFF delay
■ ■ ■ ■ ■ ■
– Staircase lighting
■ ■ ■ ■ ■ ■
– Warning before end of staircase
lighting
■ ■ ■ ■ ■ ■
– Staircase lighting time set via
object
■ ■ ■ ■ ■ ■
– Flashing
■ ■ ■ ■ ■ ■
– Switch response can be set
(N.O./N.C.)
■ ■ ■ ■ ■ ■
– Threshold values
■ ■ ■ ■ ■ ■
Current detection – – – – –
■
– Threshold value monitoring – – – – –
■
– Measured value detection – – – – –
■
Scene function
■ ■ ■ ■ ■ ■
Logic function
– Logic object AND
■ ■ ■ ■ ■ ■
– Logic object OR
■ ■ ■ ■ ■ ■
– Logic object XOR
■ ■ ■ ■ ■ ■
– Gate function
■ ■ ■ ■ ■ ■
Priority object / forced
operation
■ ■ ■ ■ ■ ■
Heating/fan control
– Switch ON/OFF (2 step)
■ ■ ■ ■ ■ ■
– Cyclical fault monitoring
■ ■ ■ ■ ■ ■
– Automatic purging
■ ■ ■ ■ ■ ■
Fan coil control
1) ■ ■ ■ ■ ■ ■
Special functions
Preference on bus voltage
failure/recovery
■ ■ ■ ■ ■ ■
– Status messages
■ ■ ■ ■ ■ ■
1)
See special ABB i-bus
®
KNX devices for the HVAC area, e.g. Valve Drive actuator, Fan/Fan Coil actuator or Fan Coil actuator.
■ = possible functions