manualshive.com logo in svg

ABB HVC 200, Руководство по эксплуатации и установке, Страница: 35 / 92

Поделиться
Скачать
ABB HVC 200 Скачать руководство пользователя страница 35

5

Pre-installation

5.1

Prepare the site

Note:

Also refer to the installation brief, the installation drawing and the

installation manuals of all components of the system that you ordered.

1. Make sure that the space and the airflow around the cabinet is sufficient. Refer

to section 

12.9

.

2. Design the site according to these rules:

a. The length of the DC power cables between the power cabinet and the

devices that are installed at each outlet do not exceed the maximum length.

Refer to the manuals of the devices that are installed at each outlet for the

maximum length of the cables.

Note: It is possible to increase the maximum length of the cables with an

optional long-distance kit. The long-distance kit has its own manual. Ask

the manufacturer.

b. Obey the ambient conditions. Refer to section 

12.11

 .

c. Install sunlight protection at locations, where the power cabinet is exposed

to direct sunlight and high ambient temperatures for most of the day.

3. a. Make sure that a circuit breaker and a residual current device are installed

to protect the AC auxiliary (power supply line of charging posts). Refer to

section 

12.16

.

b. Contact the manufacturer when the circuit breaker or the residual current

device are not installed. Refer to section 

1.11

.

4. Prepare the input cables:

•

AC input cable. Refer to section 

12.13.2

.

•

Ethernet cable, if no wireless 2G/3G/4G signal is available. Refer to section

12.13.10

. Contact the manufacturer if you require a specific configuration.

Refer to section 

1.11

.

Note:
•

The cables enter the cabinet from the bottom.

•

If you install a long-distance kit, then pay attention to these items:
•

Ignore the procedures in this manual regarding the installation of

the Ethernet cables.

•

Follow the instructions in this manual regarding the installation of

the cables of the long-distance kit. Refer to section 

6.3.12

.

•

Follow the instructions in the manual that comes with the long-

distance kit.

Pre-installation

HVC 200/300/360-EN | 002

35

Содержание HVC 200





























































































Отзывы:

Нет отзывов