ABB FMBT-21, Руководство пользователя

Страница: 35 / 92

Modbus register Input data Modbus register Output data
(4)00053 Actual value 2 (Not used) (4)00003 Reference 2 (Not used)
(4)00054 Power
1)
(4)00004
Constant frequency 1
1)
(4)00055 (4)00005
(4)00056 DC bus voltage
1)
(4)00006 Constant frequency 2
1)
(4)00007 (4)00057
1) Example
The table below gives the recommended drive parameter settings.
Description Setting for ACS480 and ACS580
drives Drive parameter)
Enables communication between
the drive and the fieldbus adapter
module. 1 = Enable 50.01 FBA A enable
Enables fieldbus A communica-
tion fault monitoring.
1 = Fault
1)
50.02 FBA A comm loss func
Defines the fieldbus A communic-
ation break supervision time. 3.0 s
1)
50.03 FBA A comm loss t out
Selects the fieldbus A reference 1
type and scaling. 0 = Speed or frequency 50.04 FBA A ref1 type
Displays the type of the fieldbus
adapter module.
Modbus/TCP
2) 51.01 FBA A type
Selects the Modbus/TCP protocol
and the ABB Drives - Enhanced
profile. 1 = MB/TCP ABB E 51.02 Protocol/Profile
Ethernet communication rate is
negotiated automatically by the
device. 0 = Auto
1)
51.03 Commrate
Configuration will be obtained
from parameters 05…13. 0 = Static IP
1)
51.04 IP configuration
First part of the IP address 192
1)
51.05 IP address 1
Second part of the IP address 168
1)
51.06 IP address 2
Third part of the IP address 0
1)
51.07 IP address 3
Last part of the IP address 16
1)
51.08 IP address 4
Sets the network mask as
255.255.255.0, allowing access
only to the last subnet. 24
1)
51.09 Subnet CIDR
Sets the communication timeout
as 1 second. 10
1)
51.20 Timeout time
The timeout feature monitors the
updating of the Control word and
Reference 1. 2 = Control RW
1)
51.21 Timeout mode
Output power 01.14
1)
52.01 FBA A data in1
Modbus/TCP – Start-up 35
12