ABB FMBT-21, Руководство пользователя

Страница: 32 / 92

Default Description Name/Value No.
N/A Read-only. Displays firmware version of the adapter module in
xxyy format, where: FBA A/B appl
SW ver 33
xx = major revision number
yy = minor revision number
Example: 310 = 3.10
Version number is the form:
<major>.<minor>.<patch>.<build>
Example: 3.10.200.13 or 3.10.0.0
Application program revision of the adapter module
1) 6-digit register addressing (400001) is used instead of 5-digit register addressing (40001) to describe register
map.
2) Register address = Register a 40000 (0) if holding register area indication should be used.
For more information, see Register addressing (page 47)
FMBT-21 configuration parameters – group B (group 2)
Note: The actual parameter group number depends on the drive type. Group B (group
2) corresponds to:
• parameter group 53 in ACS380, ACS480, ACS580, ACH580, and ACQ580
• parameter group is typically 53/56 (group 153/156 in some variants) in ACS880
if the adapter is installed as fieldbus adapter A/B.
Default Description Name/Value
No.
1)
0 = None Selects the drive parameter address into which the value of the
Data out 1 register is written (from the client to the server). The
Modbus register address maps are explained in chapter
Mod-
bus/TCP – Communication protocol The content is defined by a
decimal number in the range of 0 to 9999 as follows:
FBA A/B data
out1 (client to
drive) 01
Not used 0
Virtual address area of drive control. Not used
when the Modbus/TCP protocol is used. 1...99
Parameter area of the drive 101...9999
Not used 0 = None
Parameter index with format xxyy, where 101…9999
• xx is the parameter group number (1…99)
• yy is the parameter number index within
that group (01…99).
Note: In ACS480, ACS580 and ACS880, choose Other to display a
list of mappable drive parameters.
0 = None See parameter 01 FBA A/B data out1. Data out 2 …12 02 ...
12
1) The number of parameters in this group may vary by drive type and drive firmware.
32 Modbus/TCP – Start-up