ABB FMBT-21, Руководство пользователя

Страница: 31 / 92

Default Description Name/Value No.
N/A Read-only. Displays the parameter table revision of the fieldbus
adapter module mapping file stored in the memory of the drive. FBA A/B par
table ver 28
In format xyz, where
x = major revision number
y = minor revision number
z = correction number
OR
in format axyz, where
a = major revision number
xy = minor revision numbers
z = correction number or letter.
Parameter table revision
N/A Read-only. Displays the drive type code of the fieldbus adapter
module mapping file stored in the memory of the drive. FBA A/B drive
type code 29
Drive type code of the fieldbus adapter module mapping file
N/A Read-only. Displays the fieldbus adapter module mapping file re-
vision stored in the memory of the drive in decimal format. FBA A/B map-
ping file ver 30
Mapping file revision
Read-only. Displays the status of the fieldbus adapter module
communication. D2FBA A/B
comm status 31
Note: The value names may vary by drive.
Adapter is not configured. 0 = Idle
Adapter is initializing. 1 = Exec.init
A timeout has occurred in the communication between the adapter
and the drive. 2 = Time out
Adapter configuration error: The major or minor revision code of
the common program revision in the fieldbus adapter module is
not the revision required by the module or mapping file upload
has failed more than three times. 3 = Conf.err
Adapter is off-line. 4 = Off-line
Adapter is on-line. 5 = On-line
Adapter is performing a hardware reset. 6 = Reset
N/A Read-only. Displays firmware patch and build number of the ad-
apter module in the xxyy format, where: FBA A/B comm
SW ver 32
xx = patch number
yy = build number
Example: C80D ≥ 200.13
or 0 ≥ 0.0
Common program version of the adapter module
Modbus/TCP – Start-up 31
12