42/24-30 EN Rev. 1
EL6010 Gas Analyzer in Category 2G Operator’s Manual
21
Chapter 3
Gas Analyzer Operation
Readout
Screen
The lighted LCD screen consists of two lines of 20 characters each.
CO 105.2 ppm
In measuring mode the screen displays the sample
component name(s), the measured value in digits
and the physical unit for the measured value.
Display in
Measuring Mode
CO 21.14 %Span
Press the
Ø
key to display the measured value as a
percentage of the measuring range (span).
All screen displays shown in this operator’s manual are examples. As a rule, actual
displays on the device will differ.
Number of Places
after the Decimal
Point
When the screen displays the measured value in physical units (e.g. ppm) the
number of places after the decimal point depends on the size of the measuring
span:
Span
(in physical units)
< 5
≥
5...< 50
≥
50...< 500
≥
500
Places
3 2
1
0
For the display of the measured value as a percentage of the whole measuring
range (%Span) two places are always shown after the decimal point.
The number of decimal places when setting the parameters is the same as in the
display in measuring mode.
Blinking Screen
Blinking of part of the screen in measuring mode indicates that the gas analyzer or
process system has experienced a fault.
See Chapter “Status Messages, Troubleshooting”, page 45, for details on faults,
causes and corrective actions.
Содержание EL6010
Страница 1: ...Continuous Gas Analyzers EL6010 Operator s Manual 42 24 30 EN Rev 1 ...
Страница 2: ......
Страница 3: ...Continuous Gas Analyzers EL6010 Operator s Manual Publication No 42 24 30 EN Rev 1 Edition 07 04 ...
Страница 66: ...64 EL6010 Gas Analyzer in Category 2G Operator s Manual 42 24 30 EN Rev 1 Declaration of Conformity continued ...
