ABB DPA Upscale RI Series, Руководство пользователя

Страница: 128 / 133

Section-10
04-3006_S10_TDS_ABB_DPA_UPSCALE_RI_10-80kW_EN_150316.doc Page 11/16 ABB
Modifications reserved
10.8.4 CUSTOMER INTERFACES Terminals X1
…
X2
10.8.5 CUSTOMER INPUTS DRY PORTs: Terminal block X2
Connection of Remote Shut down facilities, Generator Operation, Customers specials
(see UM Section 9 / OPTIONS)
10.8.6 CUSTOMER OUTPUTS DRY PORTs : Terminal blocks X1
Provision of signals for the automatic and orderly shutdown of servers, AS400 or Automation building systems
All voltage free contacts are rated 60 VAC max. and 500 mA max.:
All the interfaces are connected to Phoenix Spring terminals with wires : 0.5 mm2
Block Terminal Contact Signal On Display Function
X2
X2 / 1 NO MAINS_OK Mains Present
X2 / 2 NC ALARM Mains Failure
X2 / 3 C
Common
X2 / 4 NO
LOAD_ON_INV
Load on Inverter
X2 / 5 NC Message
(Load on Mains bypass)
X2 / 6 C
Common
X2 / 7 NO
BATT_LOW Battery Low
X2 / 8 NC ALARM
Battery OK
X2 / 9 C
Common
X2 / 10 NO
LOAD_ON_MAINS Load on bypass (Mains)
X2 / 11 NC Message
(Load on Inverter)
X2 / 12 C
Common
X2 / 13 NO
COMMON_ALARM Common Alarm (System)
X2 / 14 NC
ALARM NO Alarm Condition
X2 / 15 C
Common
X1
X1 / 1
IN
+ 12Vdc
Generator Operation
X1 / 2 GND GND
(NC = Generator ON)
X1 / 3
IN
+ 12Vdc Customer IN 1
X1 / 4 GND GND (Function on request, to be defined)
X1 / 5
IN
+ 3.3Vdc Temperature Battery
X1 / 6 GND
GND
(If connected , the battery charger current if depending of the battery
temp.)
X1 / 7
IN
+ 12Vdc Remote Shut down
X1 / 8 GND GND
(Do not remove the factory mounted bridge until external Remote Shut
down is connected)
X1 / 9 IN
+ 12Vdc 12 Vdc sourse
X1 / 10 GND GND
(max. 200 mA load)
Phoenix Spring
Terminals (X1…X
2) Connection