ControlMaster CM10, CM30 and CM50
Universal process controllers,
1
/
8
,
1
/
4
and
1
/
2
DIN
4 Installation
IM/CM/S–EN Rev. R
11
4.3 Mounting
ControlMaster is designed for panel mounting. For NEMA4X
protection, a panel thickness of 2.5 mm (0.1 in.) is required.
To panel-mount the controller:
1.
Cut a hole of the correct size for the controller in the
panel – see Section 4.2, page 9 for dimensions.
2.
Insert the controller into the panel cut-out.
Referring to Fig. 4.4:
3. Position the upper panel clamp
A
at the top front of
the case against the panel.
4. Locate the panel clamp anchor
B
in slot
C
.
5. Tighten the panel clamp anchor screw
D
until panel
clamp
A
is secured against the panel.
6. Repeat steps 3 to 5 to fit the lower panel clamp
E
and panel clamp anchor
F
.
Caution.
Do not overtighten the screw.
Fig. 4.4 Mounting Details
E
A
C
F
D
B
