ABB AX410, Руководство пользователя

Страница: 9 / 84

Single and Dual Input Analyzers for Low Level Conductivity
AX410, AX411, AX413, AX416, AX418, AX450, AX455 & AX456 2 OPERATION
IM/AX4CO Issue 11 7
2.3.2 Dual Input Conductivity
Measured Conductivity
Sensor A.
Sensor B.
Notes.
•
Dual Cond.
is displayed only if
Signal Calc.
is set to
No Calculation
- see section 5.3,
page 21. See below for an explanation of calculations.
• The displayed conductivity readings are the actual values of the sample.
• AX455 analyzers only - If
Cond.Units
for a sensor is set to
USP645
(Section 5.3), the
displayed conductivity reading for that sensor is the uncompensated conductivity
value of the sample, i.e. its value at its measured temperature (see below).
Temperature Compensated Conductivity
- AX455 Analyzers Only
Sensor A.
Sensor B.
Notes.
• This frame is displayed only if
Cond.Units
for either or both sensors is set to
USP645
- see section 5.3, page 21.
• If
Cond.Units
for a sensor is set to
USP645
(Section 5.3), the displayed conductivity
reading for that sensor is the temperature compensated value, i.e. the value it
would be at a sample temperature of 25ºC (77ºF).
Measured Temperature
Sensor A.
Sensor B.
Note.
The displayed temperature readings are the actual values of the sample.
See Section 3.1.
Enable Cals.
set to
Yes
(Section 5.3) - see section 4.1, page 17.
Enable Cals.
set to
No
(Section 5.3)
and
Alter Sec. Code
not set to zero (Section 5.9) -
see section 5.1, page 19.
Enable Cals.
set to
No
(Section 5.3)
and
Alter Sec. Code
set to zero (Section 5.9) - see
section 5.2, page 20.
Temperature
25.6
Deg.C
24.4
Deg.C
Dual Cond.
0.883
uS/cm
0.892
uS/cm
@ 25 Deg.C
0.886
uS/cm
0.895
uS/cm
VIEW SETPOINTS
SENSOR CAL.
SECURITY CODE
CONFIG. DISPLAY
Dual Cond.