ABB ACS880-14, Руководство по оборудованию

Страница: 140 / 248

Required parts
Drive module standard parts
•Drive module and LCL filter module
•Top guide plate
•Fastening brackets (2 pcs)
•Grounding busbar
•Pedestal guide plates (2 pcs)
•Telescopic extraction and insertion ramp
•Fastening screws in a plastic bag
•External control unit
Drive module options
Description Qty (pcs) Option code
Full power cabling panels 1 +H381
Rittal parts and alternative ABB parts
Description Qty (pcs) Rittal part code
Enclosure frame: Frame, rear door, roof plate, plinth. 1 VX 8806.000
Side panels for the enclosure 1 VX 8106.245
Spacers for roof plate. Alternative ABB roof (3AUA0000125203
[IP20], AUA0000114968 [IP42]), see
Air outlet kits (page 176) .
1 SZ/DK 7967.000
(one set = four pieces) +
additional spacers
Punched section without mounting flange, for 800 mm horizontal 1 VX 8617.140
(one set = four pieces)
Air filter 323 mm × 323 mm. Remove the filter mat according to
the manufacturer’s instructions.
Alternative ABB air filters (3AUA0000117002 [IP20],
3AUA0000117007 [IP42]), see
Air inlet kits (page 174) .
4 /
2
SK 3243.200 /
ABB 3AUA0000117002 (IP20)
ABB 3AUA0000117007 (IP42)
Customer-made parts (not ABB or Rittal products)
See Air baffles for H381 in 800 mm wide Rittal VX25 en-
closure (page 211)
4 Air baffles
See Bottom plate (page 209)
1 Enclosure bottom plate
Required tools
• Set of screw drivers (Torx and Pozidriv)
• Set of metric magnetic-end hexagon sockets
• Torque wrench with a 500 mm (20 in) or 2 × 250 mm (2 × 10 in) long extension bar
140 Installation example with full cabling panels (H381)