ABB ACS880-04FXT, Руководство по оборудованию

Страница: 144 / 196

Ultrarapid (aR) fuses per drive module
Fuse
Input current
(A)
Drive type
Size
Type DIN 43620
V A
2
s A
3 170M8554D 690 2150000 1250 960 ACS880-04FXT-0960A-7
3 170M8555D 690 2700000 1400 1080 ACS880-04FXT-1080A-7
3 170M8556D 690 3350000 1500 1320 ACS880-04FXT-1320A-7
3AXD10000363510
Note: See also section Protecting the drive and input cable in short-circuits and against
thermal overload (page 76) .
In multicable installations, install only one fuse per phase (not one fuse per conductor).
Fuses with higher current rating than the recommended ones must not be used. Fuses with
lower current rating can be used.
Fuses from other manufacturers can be used if they agree with the ratings and the melting
curve of the fuse does not exceed the melting curve of the fuse mentioned in the table.
Fuses (UL)
UL fuses for branch circuit protection per NEC per drive module are listed below. Make
sure that the operating time of the fuse is below 0.1 seconds. The operating time
depends on the fuse type, supply network impedance and the cross-sectional area, material
and length of the supply cable. The fuses must be of the “non-time delay” type. Obey local
regulations.
Fuse
Fuse
Input current
(A)
Drive type
Type UL class Manufacturer V A
U
N
= 400 V
A4BY800 L Ferraz 600 800 1008 ACS880-04FXT-1008A-3
A4BY800 L Ferraz 600 800 1188 ACS880-04FXT-1188A-3
A4BY800 L Ferraz 600 800 1330 ACS880-04FXT-1330A-3
A4BY1000 L Ferraz 600 1000 1610 ACS880-04FXT-1610A-3
U
N
= 480 V
A4BY800 L Ferraz 600 800 1008 ACS880-04FXT-1008A-5
A4BY800 L Ferraz 600 800 1158 ACS880-04FXT-1158A-5
A4BY800 L Ferraz 600 800 1310 ACS880-04FXT-1310A-5
A4BY1000 L Ferraz 600 1000 1610 ACS880-04FXT-1610A-5
U
N
= 575 V
JJS-500 T Bussmann 600 500 808 ACS880-04FXT-0808A-7
JJS-600 T Bussmann 600 600 960 ACS880-04FXT-0960A-7
A4BY800 L Ferraz 600 800 1080 ACS880-04FXT-1080A-7
A4BY800 L Ferraz 600 800 1320 ACS880-04FXT-1320A-7
3AXD10000363510
144 Technical data