ABB ACS850-04 series, Руководство по оборудованию

Страница: 109 / 164

Installation checklist
109
Installation checklist
What this chapter contains
This chapter contains a list for checking the mechanical and electrical installation of
the drive.
Installation checklist
Go through the checklist below together with another person.
WARNING! Follow the safety instructions, page 14 . Ignoring the instructions can
cause physical injury or death, or damage to the equipment
Check that …
Cabinet construction
The drive module is fastened properly to the cabinet. (See chapters Planning the cabinet installation and
Installation. )
Mechanical joints are tightened and not broken.
Parts are clean and painted surfaces not scratched.
The cabinet frame and parts which are in metal to metal contact with the frame (for example seams, component
fixing points on assembly plates, back of control unit mounting plate) are
not finished with non-conducting paint or
material.
Degree of protection (IPxx)
Drive option modules and other components
Type and number of option modules and other equipment is correct. Option modules and other equipment are not
damaged.
Option modules and terminals are labelled correctly.
The placement of option modules and other equipment inside the cabinet and on the cabinet door is correct.
The mounting of option modules and other equipment is correct.
Internal cabling of the cabinet assembly
Main circuit:
• AC supply input cabling is ok.
• AC output cabling is ok.
• Supply for brake resistor (if used) is ok.
Cable types, cross-sections, colours and optional markings are correct.
Cabling is not susceptible to interference. Check the twisting of cables and cable routes.