ABB ACS580MV, Быстрое руководство

Страница: 41 / 44

replace the memory unit and Sd card 41
8
REPLACE THE MEMORY UNIT
AND SD CARD
Replacing the memory unit
WARNING! Do not remove or insert the memory unit when the control unit is
powered.
See B in figure Replacement illustration on page 42 .
1. To remove the memory unit, undo the fastening screw and pull the memory unit out.
See the following figure.
2. Insert the new memory unit and fasten the screw.
Replacing SD card
Note: Do not remove the SD card while the yellow WRITE LED is lit. Writing to the SD
card is in progress.
See C in figure
Replacement illustration on page 42 .
1. Undo the fastening screw of the clip covering the memory card and press the card to
remove it. For the card location, see the following figure.
2. Insert the new card in reverse order.