ABB ACS580MV, Быстрое руководство

Страница: 23 / 44

Electrical installation 23
Connect the cables to their corresponding busbars. Use cable lugs suitable for M12 bolts.
The required tightening torque is 40 Nm.
•
Feeder cables to busbars U1, V1, W1
•
Motor cables to busbars U2, V2, W2
•
Screen ends of all conductors and the shields of all cables to the PE ground
busbar
•
Ground cable to the PE ground busbar
Terminal compartment with cover plate removed, view from front.
1 Voltage dividers
2 Motor side terminals
3 Input terminals
4 Cable entry plate (bottom plate)
1
2
3
4