manualshive.com logo in svg

ABB ACS2000 AFE 2MVA, Руководство пользователя

Поделиться
Скачать
ABB ACS2000 AFE 2MVA Скачать руководство пользователя страница 10

GENERAL INFORMATION ON MANUAL AND EQUIPMENT

10

—

Target groups and required qualifications

The drive presented in this manual is part of an 
industrial environment where voltages are present 
that contain a potential hazard of electric shock 
and / or burn. For this reason, only personnel who 
have a thorough knowledge of the drive and the 
industrial environment and have obtained the 
required qualification

 

must handle, install, operate, 

or maintain the drive.
The manual addresses personnel who are responsi-
ble for unpacking, transportation, installation, 
operation and maintenance of the drive. The per-
sonnel must carry out the below listed tasks in a 
manner that does not cause physical harm or dan-
ger, and to ensure the safe and reliable functioning 
of the drive.

—
Commissioning of the drive must 
only be performed by qualified 
and certified ABB personnel.

Handling

The personnel must be skilled and experienced in 
unpacking and transporting heavy equipment.

Mechanical installation

The personnel must be qualified to prepare the 
installation site according to the site and equip-
ment requirements and to perform the installation 
accordingly.

Electrical installation

The personnel must have a sound knowledge of the 
relevant electrical codes and specifications cover-
ing low and medium voltage equipment, be experi-
enced with electrical wiring principles, and know 
the electrical symbols typically used in wiring dia-
grams.

Operation

The personnel include all persons who operate the 
drive from the local operating panel of the drive. 
The personnel must know the functions of the 
operating panel, be adequately trained for the 
drive, and know the driven process. Special knowl-
edge of frequency converter technology is not 
required.

Maintenance

The personnel include all persons who
• are qualified to carry out preventive and correc-

tive maintenance on drive as described in this 
manual,

• are thoroughly familiar with the drive,
• have a sound knowledge of the relevant electri-

cal codes and specifications covering low and 
medium voltage equipment,

• are able to assess the hazards associated with 

the energy sources of the drive system and act 
correspondingly,

• know the safe shutdown and grounding proce-

dures for the drive system.

Responsibilities of the user

It is the responsibility of those in charge of the 
drive to ensure that each person involved in the 
installation, operation or maintenance of the drive 
has received the appropriate training and has thor-

oughly read and clearly understood the instruc-
tions in this manual and the relevant safety 
instructions.

Intended use of equipment

Those in charge of the drive must ensure that the 
drive is only used as specified in the contractual 
documents, operated under the conditions stipu-
lated in the technical specifications and on the rat-
ing plate of the drive, and serviced in the intervals 
as specified by ABB.
Use of the drive outside the scope of the specifica-
tions is not permitted.
Intended equipment use also implies that only 

spare parts recommended and approved by ABB 
must be used.
Unauthorized modifications and constructional 
changes of the drive are not permitted.
ABB and its affiliates are not liable for damages 
and/or losses related to such security breaches, 
any unauthorized access, interference, intrusion, 
leakage and/or theft of data or information.

Содержание ACS2000 AFE 2MVA






















































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды