ABB ACH550-01, Руководство пользователя

Страница: 4 / 454

Update Notice
2
FlashDrop
3703 USER LOAD C TIME
Defines the time limit for generating a fault. Half of this time is used as the limit for generating an alarm.
3704 LOAD FREQ 1
Defines the frequency value of the first curve definition point. Must be smaller than 3707
LOAD FREQ
2.
3705 LOAD TORQ LOW 1
Defines the torque value of the first underload curve definition point. Must be smaller than 3706
LOAD TORQ HIGH
1.
3706 LOAD TORQ HIGH 1
Defines the torque value of the first overload curve definition point.
3707 LOAD FREQ 2
Defines the frequency value of the second curve definition point. Must be smaller than 3710
LOAD FREQ
3.
3708 LOAD TORQ LOW 2
Defines the torque value of the second underload curve definition point. Must be smaller than 3709
LOAD TORQ HIGH
2.
3709 LOAD TORQ HIGH 2
Defines the torque value of the second overload curve definition point.
3710 LOAD FREQ 3
Defines the frequency value of the third load curve definition point.
3711 LOAD TORQ LOW 3
Defines the torque value of the third underload curve definition point. Must be smaller than 3712
LOAD TORQ HIGH
3.
3712 LOAD TORQ HIGH 3
Defines the torque value of the third overload curve definition point.
3713 LOAD FREQ 4
Defines the frequency value of the fourth load curve definition point.
3714 LOAD TORQ LOW 4
Defines the torque value of the fourth underload curve definition point. Must be smaller than 3715
LOAD TORQ HIGH
4.
3715 LOAD TORQ HIGH 4
Defines the torque overvalue of the fourth load curve definition point.
3716 LOAD FREQ 5
Defines the frequency value of fifth load curve definition point.
3717 LOAD TORQ LOW 5
Defines the torque value of the fifth underload curve definition point. Must be smaller than 3718
LOAD TORQ HIGH
5.
3718 LOAD TORQ HIGH 5
Defines the torque value of the fifth overload curve definition point.
1611 PARAMETER VIEW
Selects the parameter view, i.e. which parameters are shown.
Note: This parameter is visible only when it is activated by the optional FlashDrop device. FlashDrop allows fast
customization of the parameter list, e.g. selected parameters can be hidden. For more information, see MFDT-01
FlashDrop User’s Manual [3AFE68591074 (English)].
FlashDrop parameter values are activated by setting parameter 9902 to 31 (
LOAD FD SET
).
0 =
DEFAULT
– Complete long and short parameter lists are shown.
1 =
FLASHDROP
– FlashDrop parameter list is shown. Does not include short parameter list. Parameters that are
hidden by the FlashDrop device are not visible.
9902 APPLIC MACRO
31 =
LOAD FD SET
– FlashDrop parameter values as defined by the FlashDrop file. Parameter view is selected by
parameter 1611
PARAMETER VIEW
.
Code Description