![background image](http://html.mh-extra.com/html/abb/ach480/ach480_hardware-manual_2507117.webp)
4. Blow dry, clean and oil-free compressed air from bottom to top and simultaneously
use a vacuum cleaner at the air outlet to trap the dust. If there is a risk of dust
entering adjoining equipment, do the cleaning in another room.
5. Reinstall the cooling fan.
Replacing the cooling fans
Parameter
05.04 Fan on-time counter
shows the running time of the cooling fan. After
you replace the fan, reset the fan counter. Refer to the firmware manual.
You can get replacement fans from ABB. Use only ABB specified spare parts.
■
To replace the cooling fan for frame sizes R1, R2 and R3
WARNING!
Obey the safety instructions of the drive. If you ignore them, injury or death, or
damage to the equipment can occur.
If you are not a qualified electrical professional, do not do installation or
maintenance work.
1. Stop the drive and do the steps in section
Electrical safety precautions (page 17)
before you start the work.
2. Use a suitable flat screwdriver to open the fan cover.
3. Carefully lift the fan cover out of the drive. The fan cover holds the cooling fan.
2
3
4. Remove the fan power cable from the cable slot in the drive.
Maintenance 117
Содержание ACH480
