ABB Ability 800xA Series Скачать руководство пользователя страница 102

Страница: 102 / 122

Appendix A Error Messages

102

3BSE037076-510 D

NO_LICENSE

There is no enough number of licenses for Multisystem
Integration

NO_LOCAL_INSERT_POSITION

The object configured as parent to the uploaded objects
do not exists. Check the upload configuration.

NO_DATA

Internal error. No subscribe table data for object proxy.

NO_REMOTE

Internal error. The referenced Remote System object
does not exist.

NO_RAC_UNIT

Internal error. No Remote Access Client unit to address.
Try to restart the Remote Access Client service.

NO_SUBSCRIBEINFO

No property information was found for a remote object
proxy. This is an indication of an internal error but may be
overcome by redoing the upload of the full structure
specified for the remote object connection.

NO_PROXY

No proxy found when expected. Run 'upload clean' and
then upload everything to rebuild consistent memory
tables.

NO_PROXY_TEMPLATE

No log template was found for the log during upload. Run
'upload clean' and then upload everything to rebuild
consistent memory tables.

NO_REMOTE_SYSTEM

No connection to the remote system. Check the status to
see what is wrong.

NO_PROVIDER_OBJECT

Internal error. No remote object connection object was
found for the

specified item.

NO_TEMPLATE

No log template was found for the log. Rerun the upload
to rebuild the internal tables.

NO_LOGCFG

No log configuration was found for the log. Rerun the
upload to rebuild the internal tables.

Table 8. 800xA Multisystem Integration Error Messages (Continued)

Error Messages

Description

Содержание Ability 800xA Series



























































































































Результаты поиска

Содержание Ability 800xA Series

Отзывы:

Похожие инструкции для Ability 800xA Series

Бренды по названию

Популярные бренды

ABB Ability 800xA Series, Руководство пользователя

Результаты поиска

Содержание Ability 800xA Series

Отзывы:

Похожие инструкции для Ability 800xA Series

Бренды по названию

Популярные бренды