ABB Ability 800xA Series, Руководство пользователя

Страница: 89 / 122

Section 5 Maintenance System Alarms and Events
3BSE037076-510 D 89
3. Select the
Restore
tab and check the
Remote Access Client
check box and
Unit 0; click
Apply
.
4. Click the
Restore
button to finish the restore.
A restore of the Remote Access Client service is necessary for the uploaded
objects to work. Without a valid backup of the Remote Access Client, the
provider system must be uploaded again to the subscriber system.
After the restore of the subscriber node, restart the Remote Access Client. You can
perform this task by killing the AfwRAC process from the task manager.
System Alarms and Events
800xA generates a number of system alarms and events. Table 5 shows under what
conditions they are generated.
Table 5. System Messages
Message
Description
Extended Description
Host '%HOST%'
disconnected. Connection from the RAC to the RAS broken. This alarm is
generated both in the subscriber and provider end.
Connection to
'%HOST%'
accepted. Connection established from the RAC to the RAS. This event
is generated in the subscriber and provider end.
The node
'%HOST%' could
not be accepted
(incorrect
password). Connection refused due to wrong password. This event is
generated in both ends.
No user mapping
for remote user
'%USER No user mapping found when an attempt to perform an
operation was done. This event is generated in both ends.