ABB Ability 800xA Series, Руководство пользователя

Страница: 61 / 122

Section 3 Configuration Enabling Point of Control
3BSE037076-510 D 61
Enabling Point of Control
To use Point of Control in the subscriber system, a valid license key is required and
the Point of Control must be enabled. For more information on Enabling Point of
Control, refer to
Enabling Point of Control section in System 800xA Administration
and Security (3BSE037410*) .
Execute one of the following methods to enable the Point of Control:
1. Select
Point of Contro
l from
Start > ABB Industrial IT 800xA > System >
System Configuration Console > Security.
In the
System 800xA Configuration Console
dialog, select
Yes, enable Point
of Control
, and click
Apply (
see Figure 37
).
By default, the Point of Control
functionality is disabled.
Figure 37. Enabling the Point of Control thru SCC