manualshive.com logo in svg

ABB 2 Series, Руководство по эксплуатации и установке, Страница: 49 / 85

Поделиться
Скачать
ABB 2 Series Скачать руководство пользователя страница 49

49

 Installation

EN

D

B

C

A

•  Move the EVSE (A) on top of the base (B). Use a crane or 

a forklift.

•  Carefully lower the EVSE on the base. Make sure that 

cables do not get trapped between the EVSE and the 

base. 

•  Make sure that the 6 holes in the EVSE (A) and the base 

(B) are aligned.

NOTE

To help this operation 2 centering pins are 

installed on the base. 

•  Open the front door of the EVSE.

•  Install the 3 front bolts (D), located on the internal lower 

part of the EVSE (in red), to secure the it the base.

•  Open the rear door of the EVSE.

•  Install the 3 rear bolts (C), located on the internal lower 

part of the EVSE (in blue), to secure it to the base.

•  Close all doors of EVSE.

A

B

•  Remove the eye bolts (A) on the roof.

•  Install the fasteners (B), each with a flat washer and a 

split lock washer.

NOTE

The fasteners, the flat washers and the split 

lock washers are placed in a bag, in the lower 

internal part of the EVSE.

CAUTION

Make sure that there are no kinks in the cables

The mechanical installation of the EVSE Terra 60 is completed and the electrical connections can be done.

Содержание 2 Series






















































































Отзывы:

Нет отзывов