ABB Robotics IRB 1520 Скачать руководство пользователя страница 51

Страница: 51 / 310

Lifting the robot with roundslings

Use this procedure to lift the robot with roundslings.

Note

Action

See

Risk of tipping/stability on

page 48

Move the robot to an appropriate lifting posi-
tion.

Make sure the roundslings do not rub
against any sharp edges.

Fold the two roundslings in U-shape and attach
them as follows:

•

run one roundsling through the lug in
the frame, run it on both sides of the
upper arm and secure it safely at the
overhead crane.

•

put the other roundsling around the axis
3 gearbox and secure it safely at the
overhead crane.

Capacity for the roundslings are spe-
cified in

Required equipment on

page 50

See attachment in

Attaching the

roundslings on page 50

CAUTION

The robot weighs 170 kg
All lifting accessories used must be sized ac-
cordingly!

WARNING

Personnel must not, under any circumstances,
be present under the suspended load!

Raise the overhead crane to lift the robot.

Product manual - IRB 1520

3HAC043435-001 Revision: L

2 Installation and commissioning

2.3.1 Lifting robot with roundslings

Continued

Содержание IRB 1520






















































































































































































































































































































Результаты поиска

Содержание IRB 1520

Отзывы:

ABB Robotics IRB 1520, Руководство по эксплуатации продукта, Страница: 51 / 310

Результаты поиска

Содержание IRB 1520

Отзывы: