ab Solares Smart Spa, Руководство по эксплуатации

Страница: 23 / 40

Solares™ Smart Spa Bathing System Operating Manual
CD0036 - 23 - 1121
It’s important to make sure the weight of any
accessories added or removed from the chair
are accounted for to ensure displayed
weights are correct. Accessory weights can be
automatically offset by toggling the
appropriate button in the top right corner.
(They show up green when you’ve identified
that the accessory in question is on the chair
or grey if it is not.)
For example: if you select the gel pad button
to indicate that one is being used on the chair
then the 7.8lbs of the gel pad will be
subtracted from the weight displayed.
(Assuming it was not on when the chair
weight was last calibrated.)
Tilt Screen
Press and hold UP arrow to tilt the tub up. The
tub will automatically stop when it is at the
correct height for transfer.
Press and hold the Down Arrow to lower the
tub. The tub will stop automatically when it
reaches maximum depth. You can release the
button at any time if you do not want to tilt all
the way in either direction.
Bathing Screen
The water screen contains all the controls that
you will be using in the bathing process.
Temperature Control:
The temperature shown to the right of the
arrows is the temperature that the tub is set to
maintain. Push the up arrow to bump up the
temperature and the down arrow to bump it
down. You can also tap the temperature itself
and enter your desired water temperature.
The filling temperature is the temperature of
the water as it passes through the manifold. If
this is lower than the set temperature it could
mean that you are low on hot water.