Optigo OP10 user manual
Chapter 9
Clock and scheduler
27
For example, you wish the unit to run Monday to Friday between 07:30 and 18:00, Saturday
8:00 to 14:00.
Set first on-time to day 8 and 7:30, the first off-time to day 8 and 18:00. Set the second on-
time to day 6 and 8:00 and the second off-time to day 6 and 14:00. Set all others to day --.
If you want the unit to run around the clock, set the on-time to 0:00 and the off-time to 0:00.
Menu 0.9, Override
After the eight switching point menus there is a ninth, 0.9. There the present output status of
the scheduler is shown and you can manually override the setting.
If, for example, the switch is shown as ON and you change it to OFF it will remain off either
until you manually change it to On again or until the next timer ON-point is reached.
Menu OK
After the scheduler menus there is a final menu, OK. A klick on the encoder knob will exit
the Clock and Scheduler level and return you to the Basic Display.
Scheduler, control mode 4
Menus 0.1 – 0.8
With the 4 pairs of on-off menus you can create 4 different economy periods, either for
single days or for a group of days. The day of the week number can be set to any value 1 to 9
or -- for unused menus.
Numbers 1 to 7 represent the days of the week Monday to Sunday. Number 8 will apply the
set time every day Monday through Friday and number 9 will apply the set time all 7 days of
the week.
In this application you need to remember that ON will switch ECOnomy period (lowered
temperature) on and OFF will switch ECOnomy period off.
For example, every weekday morning you want the temperature to start rising at 06:00 and to
remain at comfort level until 21:00. On Saturday and Sunday you want high temperature
from 07:00 to 23:30.
Set first on-time to day 8 and 21:00, the first off-time to day 8 and 06:00. Set the second on-
time to day 6 and 23:30 and the second off-time to day 6 and 07:00. Set the third on-time to
day 7 and 23:30 and the third off-time to day 7 and 07:00.