AAton A-Minima, Руководство пользователя

Страница: 29 / 29

video back housing. Be careful not to pull on the BNC cable as you
could damage the video electrical connections.
Power the A-minima and turn on the video assist.
You should see a picture of the viewing screen on the monitor. Open
the video lens iris by moving its lever towards the rear of the A-
Minima.
While looking at the image on the monitor gently move the CCD
head assembly until the viewing screen image is in focus and square
to the monitor. When this operation is achieved, hold the unit in
position and access the internal tubular holder screw. Tighten it
moderately.
Replace the video back housing on the video front housing and
secure it in position with the three allen screws, being careful not to
pinch any wires.
Chapter 5 - Accessories
57