Aastra X Series, Руководство по установке и внедрению

Страница: 127 / 217

Page 6-127 10/2008 AMT/PTD/TR/0020/2/7/EN
The NBRESYNC register gives the number of times the LDT card has changed to automatic
resynchronisation. Its maximum value (FFH) is retained once attained so long as this register
has not been re-read.
Note:
This register is only incremented if the LDT card is in automatic resynchronisation mode.
The reading of this latter resets the counter.
RFEN REGISTER
The RFEN register, accessible in read mode only, contains the card location code. Its content is
the cabled code in the back plane or the opposite of the CLX number used to recognise system
bus commands.
I/O address = 503CH
NADR11 .. NADR8 = Status of inputs fixing the number of the CLX position
NA/B=0: LDT card fitted with 16 accesses
NA/B=1: LDT card fitted with 8 accesses
MASTER=1: LDT generates the DECT clock (master).
RESYNCAUTO=1: LDT is in automatic resynchronisation mode.
6.5.2 Reading of the LDS card register content
REGISTRE RFEN
The RFEN register, accessible in read mode only, contains the card location code. Its content is
the cabled code in the back plane or the opposite of the CLX number used to recognise system
bus commands.
I/O address = 503CH
bit 7 bit 0
ABSHDECT NMASTER NA/B
ADR12 ADR11 ADR10 ADR9 ADR8