Aastra OpenPhone 61, Руководство пользователя

Страница: 88 / 124

Features and MenuCards Main Menu
84
internal call numbers) when you access this menu item. Select the key for which
you want to activate or deactivate the hunt group. If this key is assigned to several
hunt group numbers, select a specific hunt group number, or select the option
All
if the setting is to be activated for all hunt group numbers assigned to this
key.
Note: If you are the last reachable member of the hunt
group and you log out then any further callers will hear a
busy signal.
Tip: If you assign a hunt group number to a feature key, you can
log out from and log onto the hunt group by pressing single
key. The display will show you which hunt group number is
assigned to the feature key, which is useful if you are a mem-
ber of several hunt groups (see also
Programming Functions
(Features) starting on page 105).
5 Auto call Answer.
: You can set the period of time after which calls on your
telephone are to be automatically accepted. Under
Duration:
enter the period
of time in seconds (this can be a value between 0 and 99). Then choose whether
automatic call connection should be activated for
Internal calls
,
External
calls
or
Int.ƒ&ƒExt. calls
. You activate automatic call connection with
On
,
and deactivate the function with
Off
.
5.2.3 MenuCard “Call Forwarding”
Select
2ƒCall forwarding
, followed by …
1ƒCall diversion
: When you have multiple trunk keys configured on your tel-
ephone, you can programme call forwarding for each of these keys individually. To
do so, select the desired key from the displayed list and press
. If the call for-
warding should apply to all configured trunk keys, select the
Device
menu entry
and press .
Select
Immediately
,
After delay
or
Busy
to specify the type of forwarding
and press . Then key in the
Dest.
of the call forwarding (please refer to the
chapter entitled Manual or Automatic Trunk Line Seizure starting on page 44).
Duration
: When programming call forwarding after time, enter the time in
seconds after which a call is to be forwarded (10 … 120 seconds). If you do not
enter a value, the default time interval provided by the system administrator at
system configuration is used (default: 20 seconds).