background image

TD 92474EN

31 October 2013 / Ver. H

User Manual
Aastra DT69x DECT Telephones

61

LED Error Indications

See also chapter 

 

LED Indications during Easy Replacement 

on page 69.

LED is flashing red, quick flash, (100 ms on, 800 ms off)

1) If a third telephone, that is another telephone than the "old" (the replaced telephone) 
and "new" (the replacement telephone) telephone, is inserted into the charger during Easy 
Replacement, this error indication appears. Change to the correct telephone.

2) The charger has found that Easy Replacement does not work. Change back to the "new" 
telephone.

SERVICE NEEDED
Hardware error

Note: This display 
message is only shown 
in English

There is a communication problem 
between components in the 
telephone.

Send the telephone for service.

SERVICE NEEDED 
Parameters corrupt

Note: This display 
message is only shown 
in English.

Telephone is defective.

Select the reset option on the 
middle soft key and upgrade 
the telephone’s software to 
version 3.0.0 or greater. If this 
is not available or the problem 
persists send the telephone for 
service.

SERVICE NEEDED
Invalid IPDI
Note: This message is 
only shown in English.

Easy replacement procedure not 
followed correctly or failure during 
easy replacement procedure.

Send the telephone for service.

Enter PIN code

The telephone’s lock is activated.

Enter the required PIN code. If 
PIN code lost enter new via PDM 
or do a factory reset via PDM.

Battery low, charge now The battery level is low.

Charge the battery while it is in 
the telephone, or remove the 
battery and replace or charge it 
separately.

Phonebook is not 
available at the 
moment.

The phonebook does not respond, 
not available at the moment.

Try again later or if fault 
persists do a factory reset via 
admin menu or PDM.

Voice mail number not 
defined

There is no Voice mail number 
defined in the telephone.

Define a Voice mail number via 
PDM.

Could not encrypt 
connection

The parameter "Encryption 
Required" is enabled in the 
handset in combination with;
1)  Unencrypted base station(s); 
and/or,

2) Unsupported base station(s).

1) Disable the "Encryption 
Required" parameter in 
handset; and/or,

2) Enable the encryption in the 
base station(s); and/or,
 
3) Use supported base 
station(s). Ask your supplier. 

Содержание DT69x





















































































Отзывы: