TD 92474EN
31 October 2013 / Ver. H
User Manual
Aastra DT69x DECT Telephones
22
5.
Calling
5.1
Open the Call List
The 25 last received, dialled or missed calls are stored in a call list.
Press
to open the call list. Step with and select one of the numbers.
If a number occurs more than once the last time stamp, together with the total number of
occurrences, is shown. Press the soft key "Call" to dial.
The call list can also be accessed via the Calls info menu, see
7.2
Calls
on page 35.
5.2
Incoming Call
The flashing LED, accompanied by a ring signal and/or a vibrating telephone, give you notice
of a call. Ring signal and vibrator can be disabled, see
7.9.1
Sound and Alert Settings
on
page 47.
The calling party’s telephone number or name is shown. The name will be shown if the
calling party’s telephone number is stored in Contacts.
Other answering methods can also be set in the Settings menu, see
4.8
Settings
on page 19.
The answering methods are; Automatically and Loudspeaking.
When “Automatically” is enabled, all incoming calls will be connected automatically.
5.2.1
Answer a Call
When the signal sounds press
to answer the call, or press the Soft key
to answer
the call in loudspeaking mode. The name/number of the calling party is displayed if calling
line information is available.
The user also has the option of declining, but still acknowledging the receipt of the call, by
sending a predefined text message to the caller. See
5.7
Declining a Call with a Predefined
Message
on page 29.
5.2.2
End a Call
A press on
ends the call. The duration of the call is shown in the display. The total
time of the call can also be retrieved from the Calls menu > Call time.
5.3
Outgoing Call
5.3.1
Pre-Dial
Enter the number and press
to get the line. The number is shown on the display while
dialling. If required, press "Clear" to erase the number. By using the navigation key it is
possible to step and add or delete a digit in a number.
An international number can be dialled from the handset by entering a + character followed
by the country code and local number. To enter the + character, long press the 0 key until
the character is shown in the display.
NOTE:
The + character cannot be entered and international numbers cannot de dialled in the
following circumstances:
