TD 92474EN
31 October 2013 / Ver. H
User Manual
Aastra DT69x DECT Telephones
28
5
When the telephone alerts, press
and the call will automatically be started.
5.4.13 Send Call Waiting
This feature can be used when you want to announce a person that you are trying to reach
him/her by sending a notification tone to his/her handset. When the person is engaged in a
call, do as follows:
1
Press "More".
2
Select "Call waiting"
1
.
3
Press "Select". The other part will get a "Call waiting" signal.
When the line is free it will automatically call the number again. This is system dependent.
5.4.14 Answer Call Waiting
NOTE: Depending on system setup and configuration, this feature might be handled in one
of two different ways:
Method 1
During an ongoing conversation and a short tone for another incoming call appears, do as
follows:
1
Press the soft key "More" during the call.
2
Select "Answer Call waiting".
3
Press "Select". The new call is now connected, and the first call is on hold.
When the line is free, the call on hold will automatically be dialled again. This is a system
dependent feature.
Method 2
If a second caller calls during a phone call, the handset will beep and display the text
"Internal call" for internal callers and "External call" for external callers. The handset will also
show the name or phone number of the second caller. To answer the second caller:
1
Press the soft key "Accept".
The text "Switch" briefly appears on screen, and the handset transfers to the second
call. The first call is put on hold.
2
When finished speaking with the first caller, select the "More" soft key.
3
Select "End Call".
The second call is closed and the first call is retrieved.
NOTE: It is possible to reject a second call by pressing the "Decline" soft key. The second
caller will hear a busy tone, and the call will be logged as a missed call in the handset.
5.4.15 DTMF
Some systems/PBXs require that the handset sends Dual Tone Multi Frequency (DTMF)
when pressing the keys. DTMF can be enabled as follows:
1
Press "More" during the call.
2
Select "DTMF".
3
Press "Select". This will enable the use of DTMF signals.
