Aastra 800, Руководство пользователя, Страница: 128 / 136

Frequently Asked Questions DECT
126
14.2 DECT
Question: Is it possible to increase the time for the enrolment procedure?
You must manually enter the IPEI of the DECT device in the Configurator . The
enrolment time is then increased to one hour ( Telephony: Devices: DECT Phones
menu).
Question: Another manufacturer’s DECT device is not functioning.
Check whether the DECT device supports the DECT GAP standard. In the
Configurator , also make sure GAP is set for this DECT device ( Telephony:
Devices: DECT Phones menu).
14.3 LAN
Question: Why is it not possible to establish a network connection with the
Aastra 800?
Check whether the LEDs for the switch and the PC’s network card are indicating a
connection.
To check whether there is a network connection with your Aastra 800, enter the
“ping IP address” command in “Run” in the Windows Start menu (e.g. ping
192.168.99.254).
Question: How can I determine the IP address of the Aastra 800?
To find out what the IP address is, enter the code number
*182
on one of
the connected system telephones.
The code-number procedure
*183
also displays the network mask.
Question: The network connection is functioning, but nothing is displayed in
the browser.
Enter the complete IP address of the Aastra 800 along with the protocol identifier,
for example http://192.168.99.254/.
Check whether the browser has been configured for connection through a proxy
server. If so, deactivate the “Connect through proxy server” setting.