Aaronia Spectran V4 Скачать руководство пользователя страница 27

Страница: 27 / 123

Getting started

First you have to configure your Aaronia RSA to your needs. Please start with the network configuration to make

sure that the RSA is running and available in you local network. Follow the instructions in the chapter

Network

Configuration.

After you have successfully finished the network configuration, you can login into the administration area.

Navigate to the

Server Control

page and press the button

Start Spectran Server

(green play button).

The server will start up after a couple of seconds and the message "Server started successfully" will appear

in the black console window. If the Spectran device was already powered on before booting the system, the

Spectran Server should run automatically. There is no need to start it manually. The combobox on bottom right of

the console window will be filled with serveral server commands.

If the combobox is empty after starting the server, or an error message appears in the console window,

something went wrong in server startup.

Reason could be, server couldn't find the spectrum analyzer device, because you forgot to turn on the spectrum

analyzer at the front panel of the RSA.

Try again to start the server by pressing the "

Play

" button.

If it won't work after some retries, you have the possibility to restart the hole system by clicking the button

Reboot System

". This behavior can happen if the systems boots after a power failure crash. After the reboot

all should work well.

To find solutions for problems of the Spectran server, you can have a look to the server log files. They are located

in the

administration area -> System Overview -> Server Logfile.

In the pre-release version, the logfiles are very detailed. In the release version, these messages will be reduced

to easier messages with an other structure.

Also the

FAQ

contain useful information for troubleshooting.

Now you have a running Remote Spectrum analyzer server.

Install and start the MCS Software on your client computer. Open the SPECTRAN menu and select "

Network

connection

". The dialog will open and you have to enter the IP address and the server port of the RSA. If the

connection is established, the MCS ask for the authentication data.

It is possible to connect with each user you have configured on the RSA in the section "

User Management"

Thats all!

Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176

TestEquipmentDepot.com

Содержание Spectran V4




























































































































Результаты поиска

Содержание Spectran V4

Отзывы:

Похожие инструкции для Spectran V4

Бренды по названию

Популярные бренды

Aaronia Spectran V4, Руководство пользователя

Результаты поиска

Содержание Spectran V4

Отзывы:

Похожие инструкции для Spectran V4

Бренды по названию

Популярные бренды