Aaronia Spectran V4, Руководство пользователя

Страница: 10 / 123

( figure 2.1.7 )
7. Now you can change the IP address of the LAN adapter to a specific address. Activate the radio button Use
the following IP address: and enter an address in the range 192.168.178.1 to 192.168.178.254
except the 192.168.178.33 because the RSA unit already uses this address ( figure 2.1.7 ).
8. In the field Subnet mask, you have to enter the 255.255.255.0 .
9. All other field can be ignored.
10. Press OK button to complete the configuration and close all other windows.
11. Open your webbrowser (Firefox, Chrome, etc) and enter the RSA address in the address field. Now the RSA
configuration page should open in the browser window.
12. In the webinterface you can configure the RSA device to the settings of your target network (Page System
Configuration -> IPv4 Configuration
).
Attention:
If you change the IP address of the RSA device to another net / subnet, you have also to reconfigure the network
settings of your client pc! Otherwise the webinterface will be unreachable!
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
TestEquipmentDepot.com