Aaronia Spectran V4 Скачать руководство пользователя страница 23

Страница: 23 / 123

Users Guide

Aaronia Remote Spectrum Analyzer Series

Our SPECTRAN RSA Series is available with three different Aaronia SPECTRAN spectrum analyzer (two high

frequency analyzer and one low frequency analyzer). You can find all technical details in the specific datasheet

on our

website

The remote server software is an optional part for our RSA series. This software gives you the possibility to

access the spectrum analyzer via web interface all over the world (for example bound to a static IP address). You

can control the SPECTRAN settings, start or stop a recording or download data from the RSA. Create your own

network of measurement stations at different locations.

The webinterface, which is a part of the remote server software, offers a lot of features, like a graphical spectrum

with interactive controls and the web based configuration of the RSA. Exported recording data can be imported to

our MCS software for further analysis etc. Please note, the webinterface is completly based on web technolgies

and it isn't possible to integrade all features like we can offer in our MCS software.

All other components of the SPECTRAN RSA are based on open source products. There are no additional costs

for licences for third party software. This makes the SPECTRAN RSA very flexible in the technical capabilities.

IMPORTANT:

If you don't buy the optional remote server software (EMF-Monitor software) you can't use the network

features! Without this software you only get a PC with our MCS software, and no remote functionallity!

All further information about the configuration of the RSA are based on the EMF-Monitor software!

ATTENTION:

If you develope on your RSA, we can't give you any warranty that all will work after your changes. If you decide

to develop new features for the system, please make a complete running backup for security reasons.

Updating the operating system can also cause problems in running the administration website or the analyzer

device server. Please note that we can't give you any warranty if you make changes in the operating system. If

you decide to make updates, please create a fully running backup of the system!

Содержание Spectran V4




























































































































Результаты поиска

Содержание Spectran V4

Отзывы:

Похожие инструкции для Spectran V4

Бренды по названию

Популярные бренды

Aaronia Spectran V4, Руководство пользователя

Результаты поиска

Содержание Spectran V4

Отзывы:

Похожие инструкции для Spectran V4

Бренды по названию

Популярные бренды