Aaronia Spectran V4, Руководство пользователя

Страница: 5 / 123

1. Connecting the cables
( figure 1.1 )
1. Connect the power supply and the ethernet cable to the ports on the back side of the RSA unit. ( see figure 1.1 )
(
figure 1.2
)
2. Plugin the ethernet cable to the ethernet port of your client computer / switch or router. This depends on your
network infrastructure. For a direct connection to the client computer, we recommend a " crossover " ethernet
cable to make sure that the connection can be established. (
see figure 1.2
)
(
figure 1.3
)
3. Power on the Spectrum Analyzer on the right side of the RSA front panel. After that, you can power on the pc
unit of the RSA by pressing the
On/Off
switch located in the center of the front panel. ( see figure 1.3 )
4. Boot / power on your client pc system.