HW V4 / © 2005 – 2013 Aaronia AG, DE-54597 Strickscheid
41
Manual Spectran V4
First operational steps
6.1.
One-hand operation
Here the HyperLOG antenna and the Spectran device are connected directly to a single
compact unit. This offers a few advantages for making adjustments during measurement, as
keys can now be pressed all the time using your index finger. However, the HyperLOG
antenna cannot be moved independently of Spectran anymore, which might create difficulties
in reading the display in certain positions (see below picture).
First, carefully screw the SMA adapter onto the SMA socket on the Spectran. (without much
resistance). Do not use excessive force. As soon as you notice a resistance, slightly tighten
the connection using the SMA-tool. Again, do not apply excessive force. Do not trigger the
over torque protection. Screw by hand the SMA-adapter to the SMA socket with care (see
below picture).
Now attach the HyperLOG antenna. For this, the HyperLOG’s guide rails need to be pushed
carefully and without force into the designated sensor pickups on the Spectran until the SMA
socket of the HyperLOG antenna snaps and locks into the SMA adapter. Now manually
screw the SMA adapter to the HyperLOG antenna, as described before. While doing so,
slightly and continuously push the HyperLOG antenna further into the sensor pickups on the
Spectran. As soon as the SMA adapter is screwed to the HyperLOG antenna, slightly tighten
the connection with the SMA tool, as described above (see Chapter. 6.4.)
