![background image](http://html1.mh-extra.com/html/aandd/ua-1200cnble/ua-1200cnble_instruction-manual_3087992028.webp)
E-28
TECHNICAL DATA
Dimensions
Approx. 44 [W] x 126 [H] x 26 [D] mm
Weight
Approx. 205g
Ingress protection
Device: IP20
Applied part
Cuff Type BF
Useful life
5 years
(when used six times a day)
Included items
UA-1200CNBLE - 1PC
Instruction Manual - 1PC
Charging cable
(KSUSB-2C)
- 1PC
Quick Guide - 1PC
Industry Canada Caution
Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate
the equipment. This transmitter must not be co-located or operated
in conjunction with any other antenna or transmitter.
Note: This equipment has been tested and found to comply with Industry Canada
rules as a Bluetooth device modular approval spread/spectrum/digital device (2400-
2483.5 MHz under IC ID IC 772C-LBZY.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and
receiver.
•Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.