A&D GC Series Скачать руководство пользователя

Страница: 67 / 79

17.3.

Inserting SD Card

1. Turn off the display.

Loosen the two screws to draw out the power panel.
You can see the SD card slot inside.

2. Slide the slot cover in the direction indicated by the arrow.

Do not apply strong force or impact to the SD card or the

slot. Do not bend them or wet them with water. Doing so

may damage them.

3. Pull up the slot cover.

4. Insert a microSD card that has a list file to the slot.

The SD card has a specific orientation. Set it in the appropriate

orientation, and insert it fully.

Do not put a label on the surface of the SD card.
Do not touch the metal terminal of the SD card with your hand or

with other metal.

5.  Close the slot cover.

6.  Slide the slot cover in the direction indicated by the arrow.

7.  Close the power panel to fasten the two screws.

Do not open or close the power panel with the slot opened. Doing so may cause damage to the SD card
and the slot.

8. Select “ ” external memory with function setting

. Refer to “

14. Functions

”

Data can be called up from external memory.

Refer to “

9.6. Unit Weight by ID Number

”

SD card slot

Содержание GC Series
















































































Результаты поиска

Содержание GC Series

Отзывы:

Похожие инструкции для GC Series

Бренды по названию

Популярные бренды

A&D GC Series, Инструкция по эксплуатации

Результаты поиска

Содержание GC Series

Отзывы:

Похожие инструкции для GC Series

Бренды по названию

Популярные бренды