![background image](http://html.mh-extra.com/html/aandd/gc-series/gc-series_instruction-manual_446421032.webp)
32
12.
Comparator Function
The comparator function compares the number of pieces or weight with upper limit or lower limit. The
comparison result is shown in 3 phases as “LO”, “OK”, or “HI”. The buzzer can be set to ring according to the
result.
Divided into three phases based on the two comparison
values of HI limit (upper limit) and LO limit (lower limit)
To use the comparator function, the function setting and upper/lower limits need to be set. For the
comparator setting, refer to
X in “
13.2. Sensitivity Adjustment Using a Weight
12.1.
Setting the Comparator
In function setting
, set the comparison mode.
Setting value
Description
Turn off the comparator function
Compare all data
Compare stable data
Compare all data except for near zero
Compare stable data except for near zero
Compare positive data except for near zero
Compare positive stable data except for near zero
In function setting
, set the comparison data.
Setting value
Description
Compare data of the number of pieces
Compare data of the weight
In function setting
, set the buzzer to ring according to the comparison result.
Example)
“ ” : Turn off buzzer
“ ” : Turn on buzzer
OK to turn on the buzzer, HI and LO to turn off the buzzer
(Buzzer keeps ringing while OK)
The RESET key does not delete upper/lower limits.
Turning the power off does not delete upper/lower limits.
赤
LO
緑
OK
黄
HI
LO
限界値
HI
限界値
LO OK HI
Red
Green
Yellow
LO
limit
HI
limit