A&D GC Series, Инструкция по эксплуатации

Страница: 20 / 79

20
9.6. Unit Weight by ID Number
The following explains how to call up a unit weight that is stored in internal or external memory. Set function
setting
to internal memory “ ” or external memory “ ” (refer to “ 14. Functions ”).
- With internal memory, the unit weight needs to be stored in advance (refer to “ 10.1. Storing Unit Weight ”).
- With external memory, a file in the corresponding format must be prepared (refer to “ 17. SD ”).
1. Press the RESET key. The three LED lights in the unit weight panel
blink. If you use a tare (container), place it on the center of weighing pan
to press the TARE key.
2. Press the ID. key. The scale displays “ID: 000000”.
3. ID or item code is selectable as a search key. Also, the AIS function,
which calls up unit weight that is closest to the current weighing value, is
available. Press the ID. key to switch the search key.
- ID search : Refer to “ 9.6.1. Search by ID Number ”
- Item code search : Refer to “ 9.6.2. Search by Item Code ”
- AIS function : Refer to “ 9.6.3. AIS Function ”
Search by ID Search by item code AIS function (manual operation)
Tare (container)