background image

2

 

1. INTRODUCTION 

 

This manual describes how this scale works and how to get the most out of it 
in terms of performance. 

 

FG series platform scales have the following features: 
 

?

 The FG series has three kinds of weight display resolution, 1/3,000, 1/6,000 

(1/7,500) and 1/12,000 (1/15,000). 

?

 There are 2 sizes of weighing pan. The FG-KAL has a larger pan and the FG-

KAM/KBM has a smaller pan. The FG-KAL/KAM has a display column and the FG-
KBM is a without column model. You can select a model that suits your own 
application. 

?

 As power source, you can use an AC adapter or C size dry batteries. 

?

 The counting function easily counts the number of articles of the same weight. 

?

 The comparator function compares the display value with upper limit and lower limit. 

The display shows the result and the optional FG-24 can output it as a relay signal. 

?

  The  optional FG-23 and FG-24 has an RS-232C interface and can output the 

weighing data to connect with a printer, computer and so on. 

 
 

2. UNPACKING 

 

When unpacking, check whether all of the following items are included: 

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Protective cover is attached. 
(All models) 

Column support foot 
(FG-KAM only) 

FG30KAM/60KAM/150KAM 
FG60KAL/150KAL 

Scale 

(Shape is different by model.) 

FG series 

INSTRUCTION MANUAL 

Содержание FG-60KAL
































Отзывы: