A&D FG-60KAL, Инструкция по эксплуатации

Страница: 11 / 31

9
6. Remove the object from the weighing pan.
?
The RE-ZERO switch will zero the scale if the weight is within ±2% of the
weighing capacity (kg) around the power-on zero point. The ZERO indicator ? turns
on. When the weight e2% of the weighing capacity (kg), it will be
subtracted to zero as a tare weight. In this case the ZERO and NET indicators turn
on.
?
The ZERO switch will zero the scale if the weight is within ±2% of the weighing
capacity (kg) around the power-on zero point. The ZERO indicator ? turns on.
When the weight exceeds ±2% of the weighing capacity (kg), the switch does not
work.
?
The TARE switch will subtract the weight to zero as a tare weight when the
weight is a plus value.
Precautions during operation
?
Make sure that the STABLE indicator is on whenever reading or storing a
value.
?
Do not press switches with a sharp implement such as a pencil.
?
Do not apply a shock load to the scale.
?
Do not place a load onto the pan that exceeds the capacity.
?
Keep the scale free from foreign objects such as dust or liquid.
?
Calibrate the scale periodically to keep weighing accuracy.
(See “8. CALIBRATION”.)
5-4. Weight display resolution
The FG series has three kinds of weight display resolution, NORMAL, HIGH and
HIGHER. The following is about “kg” and “lb” display for reference. See the “12.
SPECIFICATIONS” in detail.
NORMAL: 1/3,000
HIGH: 1/6,000 ~ 1/7,500 (depending on capacity)
HIGHER: 1/12,000 ~ 1/15,000 (depending on capacity)
The factory setting is the HIGH resolution, but it is possible to change by Function
settings “F2”. Set this function according to the application.
?
In some countries, the resolution will be limited NORMAL only, and the setting F2 is
not available.
?
In the COUNTING mode, the scale works as in the HIGHER resolution regardless
of weight display resolution.