A&D AD-4212A Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 108

A&D AD-4212A Скачать руководство пользователя страница 7

5



Clock and Calendar Function, adding the time and date to the output data.



GLP/GMP Output, using the RS-232C serial interface.



Reference Sheet, provided for a quick reference to the balance operation.



Windows Communication Tools (WinCT), allows easy communication with a Windows-based

personal computer.

Windows is a registered trademark of Microsoft Corporation.



Multiple Weighing Units, with most of the common units used around the world.



Auto display-ON Function, that displays the weighing mode without any key operation when the

AC adapter is plugged in, is available.



Stainless Steel Casing with high chemical resistance for the AD-4212B weighing unit



Stainless Steel Breeze Break, provided for the AD-4212B series balance and the

AD-4212A-100, for more accurate weighing. For the other models, it is available as an option

(OP-19).



BCD Output (OP-01) and Ethernet Interface (OP-08) are available as options

1-2 Compliance

Compliance

with FCC Rules

Please note that this equipment generates, uses and can radiate radio frequency energy. This
equipment  has  been  tested  and  has  been  found  to  comply  with  the  limits  of  a  Class  A
computing device pursuant to Subpart J of Part 15 of FCC rules. These rules are designed to
provide  reasonable  protection  against  interference  when  the  equipment  is  operated  in  a
commercial  environment.  If  this  unit  is  operated  in  a  residential  area,  it  may  cause  some
interference  and  under  these  circumstances  the  user  would  be  required  to  take,  at  his  own
expense, whatever measures are necessary to eliminate the interference.

(FCC = Federal Communications Commission in the U.S.A.)

Compliance With Directives of CE mark

This device features radio interference suppression, safety regulation and restriction of
Hazardous Substances in compliance with the following Council Directives

Council directive 2004/108/EC EN61326 EMC directive
Council directive 2006/95/EC

EN60950 Safety of Information Technology Equipment

Council directive 2011/65/EU

EN50581 Restriction of the use of certain Hazardous Substances

The CE mark is an official mandatory European marking.

Please note that any electronic product must comply with local laws and regulations when
sold or used anywhere outside Europe.

«
...
5
6
7
8
9
...
»

Содержание AD-4212A













































































































Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды