A&D AD-4212A, Инструкция по эксплуатации

Страница: 41 / 108

39
DP (Dump print) format
5if type 1
This format is used when the peripheral equipment cannot receive the A&D format.
If an AD-8121B is used, set the printer to MODE 3.

This format consists of sixteen characters excluding the terminator.

A header of two characters indicates the balance condition. No overload header is used.

The polarity sign is placed before the data, with spaces in place of leading zeros, if the data is
not zero or overloaded.

The unit, consisting of three characters, follows the data.
KF format
5if type 2
This is the Karl-Fischer moisture meter format and is used when the peripheral equipment can only
communicate using this format.

This format consists of fourteen characters excluding the terminator.

This format has no header characters.

The polarity sign is placed before the data, with spaces in place of leading zeros, if the data is
not zero or overloaded.

This format outputs the unit only for a stable value.
MT format
5if type 3

A header of two characters indicates the balance condition.

The polarity sign is used only for negative data.

The weighing data uses spaces in place of the leading zeros.

The character length of this format changes dependent upon the unit
NU (numerical) format 5if type 4
This format outputs only numerical data.

This format consists of nine characters for the AD-4212A series balance or ten characters for
the AD-4212B series balance, excluding the terminator.

The polarity sign is placed before the data with the leading zeros. If the data is zero, the plus
sign is used.
(AD-4212A series balance)
(AD-4212B series balance)
W T + 0 . 1 2 7 8 g
CR LF
T
W T
U S
Q T
Stable header Stable header of counting mode
Unstable header
Header Data Unit Terminator
Stable value
Unstable value
Data Unit Terminator
S 0 . 1 2 7 8 g
CR LF
S
S D
S I
Stable header
Unstable header
Overload header
Header Data Unit Terminator
Data Terminator
+ 0 0 0 0 . 1 2 7 8
CR LF +
+ 0 0 0 . 1 2 7 8
CR LF +
Data Terminator