![background image](http://html1.mh-extra.com/html/aamstamp/m-2000/m-2000_owners-manual_3211713020.webp)
19
PRINTING NAPKINS
1. First place your napkin guide on the table plate and then the proper cushion board using the
gauge bar to hold them in position.
2. Before you load your foil, bring the typehead down slowly and adjust the napkin guide by
moving it backward or forward to achieve the perfect desired print location on the napkin.
3. Always check to see that the gauge bar is clear from being hit by the typeholder and then tighten
the napkin guide by turning the gauge bar hold down knob.
AAmstamp also offers a special napkin guide cushion board that makes it far easier to
print large areas on napkins.