12
FOIL ADVANCE ADJUSTMENT
The 2000 Series Hot Stamping Machines come equipped with a precision foil advance
mechanism allowing you to easily adjust the pull of the foil between 0” and 6” inches.
To set the foil advance mechanism:
1. Attach the machine handle onto the right side of the machine. If you have an Air-2000 or
TITAN-2000, turn the pressure regulator on the back of the AAmstamp Foil Stamper
to 0 PSI.
2. Locate the foil advance adjustment slider bar and adjustment knob located on the left side of
the machine (See the diagrams at the front of this manual for illustration).
3. Pull the machine handle until the foil advance slider bar is oriented vertically. This will allow
the slider bar to move more freely.
4. Loosen the foil advance knob.
DO NOT
remove this knob entirely.
5. Push the slider bar down to increase the amount of foil pull and up to reduce it. You will
need to experiment with your product and prints to find the ideal setting for this adjustment.
You can determine this by watching the amount of space between the prints on the used foil
as it comes out of the machine.
6. Tighten the adjustment knob firmly to lock setting into place.
7. If you have an AIR-2000 or TITAN-2000, remove the machine handle.
Adjustment Knob
Foil Advance Slider Bar
