1
0
AIR-2000 and TITAN-2000 MODELS
The AAmstamp Air-2000 and Titan-2000 are the pneumatic air-operated versions of the AAmstamp M-2000
machines. Instead of hand operating the foil press the operator depresses a foot pedal to actuate a
pneumatic air-cylinder, which creates pressure to press the typehead into your product..
Using the Air-2000 and Titan-2000 Manually:
The Air-2000 and Titan-2000 can also be used manually when the machine handle is inserted into the right-
hand side of the machine This can be useful especially when aligning the first article to be printed. Please
note that the AIR-regulator must be turned to “0 psi” in order to operate the machine manually. Be aware
that for safety reasons the air-mechanism is disengaged while the handle is inserted.
Saftey Features:
When using the Air-2000 and Titan-2000 be sure to keep the safety shield on the machine at all times. Keep
hands clear from underneath the typehead, typeholders, and typeholder handle while printing.
As mentioned above, when the manual operation handle is inserted into the AIR-2000 or TITAN-2000 the
air-pneumatics operation of the machine is disabled.
Using the AIR-2000 and Titan-2000 Air Drive System:
To use the air drive system on the AAmstamp AIR-2000 and TITAN-2000 equipment you must first
connect the AAmstamp machine to an air-compressor capable of supplying at least 125 PSI and 1.6 CFM for
an AIR-2000 and 2.6 CFM for a TITAN-2000. We recommend getting a unit with at least a 3 gallon tank.
By having a larger tank you reduce the amount of time the compressor will need to run in order to keep up
with the AAmstamp Machine therefore increasing the life of your compressor and reducing the frequency of
the run time of the compressor.
1. Connect the air-compressor hose directly to the air-inlet connector as shown in the diagram below.
2. Attach the foot pedal connector cable to foot pedal connector as shown in the diagram below.
M-2000 Upgrade
The M-2000 can be upgraded to an AIR-2000 or a TITAN-2000 at any time. For more information on
upgrades call your AAmstamp Sales Representative.
Air Inlet Connector
Air-Dryer
Air Pressure Regulator
Foot Pedal
Air Cylinder
Foot Pedal Connectors
