AAF PulsePak Prime 10-2H, Инструкция по установке, эксплуатации и обслуживанию

Страница: 5 / 38

5 PulsePak Prime
GDED-IOM-216-B
1 INTRODUCTION
This document contains the information necessary to properly receive,
assemble, install, operate, and maintain the AAF ® PulsePak ® Prime filter system and
filters. The purchaser, installer, and operator of the filter system MUST read and
comply with this document in its entirety prior to installation of the equipment and
its operation. Failure to comply with the requirements of this manual may void the
product warranty. The information and guidelines contained in this manual are not
exhaustive, and additional or different precautions, measures, training, etc. may be
needed depending on the specific circumstances.
CAUTION
These instructions are specific to the AAF PulsePak
Prime filter system and
filters. All ancillary tasks including, but not limited to, electrical and
mechanical work, equipment handling, and safety procedures must be
performed in accordance with industry accepted practice and all relevant local,
state, and federal government codes, laws, and policies.
2 SAFETY
2.1 Safety statement
The air cleaning equipment supplied by AAF International ranges from very
large multiple-component assemblies which require significant and complex,
rigging, handling and assembly on-site, to small compact assemblies that are easily
handled and maneuvered. In addition to size, many of the dust collectors will require
electrical connections, compressed air connections, and will feature high speed
rotating equipment.
At all times, when dealing with industrial equipment such as dust collection
equipment personnel safety must be the highest priority of all involved, from
riggers, installers, operators, users, and maintenance personnel. Those responsible
on-site shall review the details of the equipment beforehand and develop a plan for
dealing with all stages of the installation from receipt of the equipment on-site to
start-up, commissioning, and hand-over. All applicable health, safety, and
environmental (“HSE”) rules, regulations and legislation shall be fully complied with
at all times.