A/V Slim MindSpa, Инструкция по эксплуатации и использованию

Страница: 8 / 25

relaxation program of approximately the same length. You may use the included patch
cord to mix the recorded material along with MindSpa's built-in sounds. Optionally
you may bypass the unit and listen directly to the recorded material while running one
of the relaxation programs with just the glasses. Both methods can be very effective.
Plug the audio patch cord into the auxiliary jack, located on the lower right-hand side.
Plug the other end into your compact disc player or MP3 headphone output jack. Set
the volume at a low to mid-range level and start the player when you begin your
program. Once you begin, the Aux In symbol will be displayed
Using the Active Sync™ Mode
MindSpa supports popular third party light and sound synchronization programs.
When specially encoded compact discs are played through MindSpa, the circuit
converts the encoded digital signals into light pulses. These digital signals are
recorded above the range of normal hearing so full recording fidelity is maintained.
We provide downloads of several free music tracks on our website. Please refer to the
enclosed brochure for download instructions.
Use with recorded materials
MindSpa can offer excellent assistance when using various types of recorded
materials such as hypnosis and self-improvement programs. MindSpa can help move
your mind into the optimal calm, quiet state so this material can be most effective.
Press and hold the Backlight button for approximately two seconds until the letters
“AS” are displayed. This indicates MindSpa is now in Active Sync mode.
1.
Begin by setting your CD player volume to about 3/4 of maximum.
2. You must disable anti-skip and bass boost if your player has either of both of
these features, otherwise the alternate program will not play properly.
3.
Light adjustments are made via the light intensity setting. Start it at level 10 or
above.
4.
When the program has started, adjust the volume setting to a comfortable level.
Note: This mode overrides the auto-off feature, so remember to manually turn off your
unit when you complete your program.